In stock (ready for dispatch)
Australian made aluminium centre console, 500W x 350D x 1380H, made in-house at Prowave HQ from 2.5mm marine grade aluminium. It comes with a 4.5mm polycarbonate folding windscreen, a storage shelf and a pre-cut steering hole. The base bolts to your boat floor on three sides.
Price range: $1,029.00 through $1,099.00
Turn a tiller steer tinnie into a forward steer boat. This Australian made aluminium centre console comes with a folding polycarbonate windscreen, an angled dash, a pre-cut steering hole and a large storage shelf. As a result, you get a proper helm and somewhere to keep your gear. Plus, we make every unit in-house at Prowave HQ.
Full measurements are in the Specifications tab.
The base has a 90 degree fold on three sides. Therefore, you can bolt it straight to the floor of your boat. Before you order, though, check your floor space against the Specifications tab. Then plan the run for your steering cable or hoses. Finally, for a complete forward steer setup, pair it with a seat box and a switch panel.
You get the Prowave® aluminium centre console with storage shelf, plus the polycarbonate windscreen on its folding aluminium rail frame with stainless steel hinges. However, the helm, steering and gauges are not included.
We cut, form, weld and finish every unit in-house at Prowave HQ, and it comes with our standard 12 month warranty. Got a smaller boat? Then see the side console with windscreen. Otherwise, browse our other centre consoles.
Yes. It folds flat on two stainless steel hinges, so it’s easier to tow and store.
Most likely. The steering hole comes pre-cut to suit most hydraulic and mechanical helms.
Yes. There’s a large storage shelf below the dash.
White powder coat or unpainted raw aluminium. Also, the photos show the white powder coated version, so select the colour you want when you order.
| Weight | 18 kg |
|---|---|
| Dimensions | 105 × 41 × 55 cm |
| Brand | |
| Colours |
| Material | 2.5mm marine grade aluminium |
|---|---|
| Overall size | 500mm W x 350mm D x 1380mm H (to top of windscreen) |
| Height to top of console | 1000mm |
| Top depth | 240mm |
| Windscreen | 4.5mm polycarbonate, 380mm high |
| Windscreen frame | 25mm aluminium rail, folds flat on 2 stainless steel hinges |
| Windscreen fixing | Stainless steel screws with black snap caps |
| Steering | Pre-cut hole to suit most hydraulic and mechanical helms |
| Storage | Large storage shelf |
| Mounting | 90 degree base fold on 3 sides, bolts to the boat floor |
| Finish | White powder coat or unpainted (raw aluminium) |
| Made | Australian made, in-house at Prowave HQ |
| Dash | Angled, room for gauges and a radio |
| Warranty | 12 months |
Only logged in customers who have purchased this product may leave a review.
5 way switch panel with bracket and 12 volt socket, on an Australian made alloy bracket powder coated white. Bolts to the side deck or side pocket of your tinnie.
Live bait tank overflow pipe, PVC, grey 
Berley bucket, with muncher, fixed 45mm step out, Powder coated 
Bait tank with window 600L x 300W x 390H, 65 litres 
Adam Marston –
Awesome product
Delivered well packaged,and on time.
Thankuou Prowave
I will be using you guys again
Adam Marston –
Brett Hannam (verified owner) –
Easy to order and arrived in good condition. Dispatched quickly to arrive 1700 klms in Cairns. Thanks
Brett Hannam –
Robert –
Really happy with my new painted centre console. Nicely made and the thing was packed up bulletproof for freight to south west rocks. Its going in my new quintrex tinny for a forward control boat..Good job guys ..thanks.
Robert –
Dan Blondinau (verified owner) –
A1 product, well made painted and finished, enough protective wrapping and packing for freight transport to cover the gateway bridge, highly recommended
Dan Blondinau –
Chris –
Looks great, exactly as I wanted.
Very professionally packed for transport to Melbourne , thanks guys. Looking forward to fitting it to my tinnie.
Chris –
Mark S (verified owner) –
Just finished converting my 3.8 tiller steering to Center console steering with this Center Console Unit. Had it shipped to Queensland, it arrived in perfect condition and was here within one week.
The console had ample room for all of my gauges, sounder/gps, switch box and detachable anchor light. The steering went into the pre-drilled holes perfectly and all the wiring was neatly concealed behind the center shelf. The finished renovation looks amazing, I am really happy I chose this product and I would highly recommend buying one to anyone considering converting or replacing one.
5 STARS for quality and service.
Mark S –
Tim (verified owner) –
Great care taken to ensure it arrived in perfect condition from its 1000k journey to us.
Welding and paint job cannot be faulted.
Well thought out and designed product which is fit for purpose.
Overall excellent quality workmanship
Tim –
Robin (verified owner) –
Great product, well thought out, and skilfully made. It is exactly as described in fact! I showed it to a TAFE technical supervisor- he was most impressed with the design and quality. Superbly packaged- took almost as long to get that off as installing the unit itself!
Lends itself to trimming off bottom and then fixing with alloy angle if too tall. You’ll be happy….I am.
Robin –
Bill (verified owner) –
This console travelled the length of Australia.
North QLD to Southern Tasmania.
Arrived in perfect condition, very well packed.
Welding and paint job is excellent, pre-drilled holes for steering boss makes things easy.
Perfect fit in the boat.
Well done Prowave, highly recommended.
Bill –
Andrew (verified owner) –
Yes very happy with product it’s built well and I’d recommend to anyone I’m converting my bow rider to a centre console and it fits the bill very happy thanks
Andrew –
Tina (verified owner) –
My husband is very happy with the centre console, he searched the internet and found this one to be the best buy for price and quality. It is excellent quality workmanship and perfect for the job and everything necessary has been built in. Will also look great on our pontoon boat we are building.
Tina –
Rob (verified owner) –
Hi ,
I serched all center Consols on Ebay this was the best well made and had stearing holes pre drilled a great product and good comunication and delivery
I will be recomending it to others
Regards
Rob
Rob –